Air knife & Compressed Air Drying Systems
Thermal Shrink, Labelling & Sealing Systems
Centrifugal Fans, Centrifugal Blowers & Exhausters
Process Heaters | Gas Boosters | Vitavox | Latex



info@secomak.com

 
   


ClustaJets

High volume air/fume movers which use an array of aluminium Ringjets mounted inside a mild steel cylinder (alternative materials may be specified).

Four models are available with outputs between 765-5270m3/hr (450-3100cfm). Flexible blowing/extract hoses 102mm-305mm (4"-12") in diameter can be attached at each end of ventilator casing.. They are typically used for exhaust fume extraction from large tanks and chambers or fresh air ventilation/cooling of workers in confined spaces. They can also be incorporated into pipelines for gas conveying.

Special flanged Clustajets for Oil Refinery.

CJ 425 MONOJET Ventilator (102mm - 4" dia.) 

Photograph shows the pulling power of
this compact ventilator, dealing with
a smoke bomb in our works. The Monojet
was originally designed for venting
Royal Navy Nuclear Submarines where a
compact but very powerful machine is
needed for venting confined spaces




Clustajets Selection Chart

For best results the compressed air supply should be properly filtered and its pressure controlled between the limits of 1.6 bar gauge (25 PSI) and 4 bar gauge (60 PSI). Operation is possible at higher pressures up to 10 bar gauge (150 PSI) but it is not recommended as the efficiency in terms of air flow to inlet air flow will tend to fall off. CLUSTAJETS are constructed from a strong welded steel casing, the inner jets being of anodised alloy. CLUSTAJETS are supplied with a standard BSP ON/OFF air control valve and the machines are pre-set and tested for immediate use on site. Alternative constructions and materials are available.



Example Applications:

Blowing fresh air into a man-hole.



Flanged version venting tank on off-shore



Removing welding fumes in a closed tank.








1) Rc signifies internal (female) taper thread to ISO/7 (BS 21).
(2) Recommended minimum nominal hose bore to ISO 2398 (BS 5118).
(3) Free air consumption with an inlet air pressure of 4 bar gauge (60 PSI). ANR is the accepted international standard description to indicate free air flow. ANR = Atmosphère Normale de Reference.
(4) CLUSTAJET used as a blower without ducting. For performance data when subjected to back pressure from ducting consult your supplier.


Click here to access all literature & datasheets

Contact us or request further information



IT Support by IT in Business Ltd