CENTRIFUGAL
BLOWERS |
CENTRIFUGAL FANS |
EXHAUSTERS
The Secomak range
of fans, blowers and exhausters offer high performance units
that are both flexible and compact. These heavy-duty, high-quality
units are suitable for a variety of industrial applications
which include: drying, cooling, air-knife applications, heating,
cleaning, pneumatic, conveying, aeration,
fluidising, air-sampling, extracting,
combustion air, vacuum lifting and holding.
Direct Drive
Centrifugal Fans | Blowers | Exhausters
Model 573
- Up to: 2.2 in.w.g. pressure 130 cu.m/hr volume
Model 574
- Up to:2.8 in.w.g. pressure 420 cu.m/hr volume
Model 513
- Up to:4.0 in.w.g. pressure 500 cu.m/hr volume
Model 643
- Up to: 9.6 in.w.g.pressure 2200 cu.m/hr volume
Model 669
- Up to:6.8 in.w.g. pressure 750 cu.m/hr volume
Supplied with a stand for mounting and available in a range
of voltages including 110 volts .
High Velocity
Centrifugal Fans | Blowers | Exhausters
Model 575
- Up to: 22 in.w.g. pressure 300 cu.m/hr volume
Model 428
- Up to: 40 in.w.g. presure 600 cu.m/hr volume
Model 492
- Up to: 50 in.w.g. pressure
900 cu.m/hr volume
Model 587-
Up to:
40
in.w.g.pressure
850 cu.m/hr
volume
Hot Air Fans
| Hot Air Blowers
Model 573
- Up to: 2.2 in.w.g. pressure 130 cu.m/hr volume
Model 574-
Up to:2.8 in.w.g. pressure 420 cu.m/hr volume
Model 513
- Up to:4.0 in.w.g.pressure 500 cu.m/hr volume
Model 643
- Up to:9.6 in.w.g. pressure 2200 cu.m/hr volume
Model 669
- Up to:6.8 in.w.g. pressure 750 cu.m/hr volume
Turbo Blower |
Turbo Exhauster
The latest addition to the Secomak range of blowers is the 587 Turbo Blower.
It is developed to deliver maximum performance to our Air Knife range. It
ensures smooth, pulsation-free air delivery across the whole performace curve. Its well-proven drive system ensures virtually maintenance-free operation and
as it is fitted with a stainless steel enclosure, the noise levels
are reduced to a minimum.
Side Channel
Fan | Side Channel Blower | Side Channel Exhauster
Outlet
Pressures up to 650mbar
Inlet Vacuums up to 450mbar
Flow Rates up tp 1080m3/hr
SECOMAK Side Channel
Blowers produce high performance from a small physical
size and operate at low noise levels. This makes them ideally suited to applications such as pneumatic conveying,
aeration and vacuum holding and lifting.
Construction is
in cast aluminium and each unit comes complete with intake
silencer and filter. All
models are designed for continuous running and are maintenance
free.
They are suitable for use in ambient up to 40degrees C. Further
details available on application.
Spares
- Bearings
- Assemblies
- Motors
- Drive Belts
- Silencers
- Filters
- Adaptors
Click
here to access all literature & datasheets
Contact
us or request further information
|
